192.168.1.1 – Router Login & Admin Guide

What is 192.168.1.1?

192.168.1.1 is a private IP address that many routers, modems and ISP boxes use as their default gateway. When you type it into your browser, it opens your router’s admin page, where you can change your WiFi name and password, see connected devices, update the firmware and adjust your network settings.

This address only works from inside your own network. It is not a website on the internet, which is why you must be connected to the router – by WiFi or by cable – for it to open.

How to log in to 192.168.1.1

1. Connect your phone or computer to your router’s WiFi (or plug in an Ethernet cable).
2. Open a browser and type 192.168.1.1 in the address bar – not in the Google search box. You can also tap the button above.
3. A login page appears. Enter the admin username and password. They are usually printed on a sticker under or behind your router.
4. Once logged in, you will see your router’s dashboard.

If the browser shows a security warning, it is normal: the router uses a simple local connection. You can continue to the page.

How to find your router’s IP address

If 192.168.1.1 does not work, your router probably uses another address. Here is how to find the right one:

• Windows – open Command Prompt, type ipconfig and look for Default Gateway.
• Mac – go to System Settings → Network → your connection → Details → TCP/IP, and look for Router.
• Android – open Settings → WiFi, tap the network you are connected to and look for Gateway or Router (sometimes under “Advanced”).
• iPhone – open Settings → WiFi, tap the (i) next to your network and look for Router.

Common alternatives are 192.168.0.1, 192.168.1.254, 192.168.8.1 (many 4G/5G routers) and 10.0.0.1.

Default username and password

The safest source is always the sticker on your router: most ISP boxes today have a unique password printed there. If yours has none, these are the usual factory defaults by brand:

If someone changed the password and nobody remembers it, the only solution is a factory reset (see below).

Routers from internet providers

Gateways supplied by internet providers – such as Xfinity, Spectrum, AT&T or Verizon in the US, and BT, Sky or Virgin Media in the UK – often use their own address (for example 10.0.0.1 on many Xfinity gateways, or 192.168.1.254 on many AT&T and BT routers) instead of 192.168.1.1. Their admin password is printed on the label, and some providers also let you manage WiFi from their mobile app.

Many providers keep certain settings locked; in that case only basic options such as the WiFi name and password can be changed by the customer. If you cannot find your login details, your provider’s support team can help.

192.168.1.1 is not working? Try this

• Check the spelling – it is 192.168.1.1 with the number one, not the letter “l”. 192.168.l.l will never work.
• Use the address bar – typing the address in a search engine shows search results instead of your router.
• Type http, not https – try http://192.168.1.1 if the page does not load.
• Be on the right network – turn off mobile data and make sure you are connected to the router’s WiFi, not a neighbour’s or a VPN.
• Try another address – find your real gateway with the steps above.
• Restart the router – unplug it for 30 seconds, plug it back in and wait two minutes.
• Try another browser or device, or clear your browser cache.

How to change your WiFi password

1. Log in to your router as explained above.
2. Open the Wireless, WiFi or WLAN section.
3. Find the field called Password, WPA Key, Pre-shared Key or Passphrase.
4. Enter a new password of at least 12 characters, mixing letters, numbers and symbols.
5. Click Save or Apply. Your devices will disconnect and you will need to reconnect them with the new password.

In the same section you can change your WiFi name (SSID). If your router has two networks (2.4 GHz and 5 GHz), change the password for both.

How to reset your router to factory settings

Find the small Reset hole on the back of the router. With the router switched on, press it with a paper clip for about 10 seconds until the lights blink, then wait a few minutes. The router goes back to the default address, username and password printed on its label. Be careful: a reset erases all your settings, and with some ISP boxes you may need your internet account details to get back online.

Keep your router secure

• Change the default admin password, not just the WiFi password.
• Use WPA2 or, if available, WPA3 encryption. Never use WEP or an open network.
• Turn off WPS, which can be abused to guess your WiFi password.
• Install firmware updates when your router offers them.
• Check the list of connected devices from time to time to spot anyone using your WiFi without permission.

Frequently asked questions

Is 192.168.1.1 the same for everyone?

Many routers use it, but not all. It is a private address, so millions of homes use the same number without any conflict: each one only reaches its own router.

Can I open 192.168.1.1 from my phone?

Yes. Connect your phone to the router’s WiFi, turn off mobile data, and open the address in any browser.

Why is my internet slow even though my router settings look fine?

Distance from the router, walls, interference from neighbours and too many connected devices can all reduce your speed. Run our free speed test to measure your real download, upload and ping, then compare it with what your plan promises.

Is it safe to change settings in my router?

Changing the WiFi name and password is safe. Avoid changing advanced settings (WAN, DNS, VLAN) unless you know what they do, because a wrong value can cut your internet connection.